Bauknecht pesukone wam 65 1 Manuaali

PDF-Manuaalit
14 Sivut Englanti

Bauknecht pesukone wam 65 1
27
Then:
1.
Plug in the appliance.
2.
Turn the water tap on (if
water immediately flows into
the appliance again, without
the appliance being started,
there is a fault. Turn off the
tap and notify After-Sales
Service).
3.
For models with fault display,
select and start the desired
programme again.
For models with no fault
display, continue the
programme by pressing the
“On/Off” button again.
If the fault occurs again, please
contact After-Sales Service (see
“After-Sales Service”).
“Water Stop” fault when
the programme selector
switch is in the “
position.
The pump is switched on
automatically in order to pump
the water out.
For models with fault display the
washing machine will also detect
a Water Stop fault (leak) if the
programme selector is in the
” position. In this case the
digital display (if one exists)
alternately shows “A
” and “F”.
For models with no fault display,
the “Water Stop” fault is
detected when the appliance is
switched on again.
Pull the mains plug out and
ensure that the water tap is
turned off.
Tilt the appliance forwards
carefully to allow the collected
water to flow out.
Then:
1.
Plug in the appliance.
2.
Turn the water tap on (if
water immediately flows into
the appliance again, without
the appliance being started,
there is a fault. Turn off the
tap and notify After-Sales
Service).
4gb15161.fm5 Page 27 Tuesday, March 19, 2002 6:16 PM
Black Process Plate
Asiaankuuluvat Manuaalit Bauknecht pesukone wam 65 1