Chapter 4 Settings — [ADVANCED MENU] menu
100 - ENGLISH
2) Press qw to switch the item.
f The items will switch each time you press the button.
[NORMAL] Standard setting.
[FAST]
*1
Simplies the image processing to reduce image frame delay.
[FIXED] Sets image frame delay to be constant regardless of the image position or magnication.
[COMPATIBLE]
*2
Sets to DZ21K series compatible frame delay.
DZ21K series: DZ21K series, DS20K series, DZ16K series
*1 When input signals are other than interlaced signals, [FAST] cannot be set.
*2 Only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2
f When [COMPATIBLE] is selected, proceed to Step 3).
3) Press the <ENTER> button.
4) Press qw to switch the [COMPATIBLE MODE] setting.
f The items will switch each time you press the button.
[NORMAL] Standard setting compatible with DZ21K serires.
[FAST] Reduces the image frame delay with the DZ21K series compatible setting.
Note
f [DIGITAL CINEMA REALITY] cannot be set when [FRAME RESPONSE] is set to [FAST], or when [FRAME RESPONSE] is set to
[COMPATIBLE] and [COMPATIBLE MODE] is set to [FAST].
f [FRAME RESPONSE] cannot be set during P IN P.
f [COMPATIBLE MODE] cannot be set when [FRAME RESPONSE] is set to [NORMAL], [FAST], or [FIXED].
[FRAME CREATION]
(Only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2)
Set the amount of image frame interpolation.
The image with fast movement can be displayed more smoothly by automatically generating the intermediate
frame from the previous and next frame.
1) Press as to select [FRAME CREATION].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF] Disables the frame creation function.
[1] Sets the amount of interpolation weaker.
[2] Sets the amount of interpolation midway. (Factory default)
[3] Sets the amount of interpolation stronger.
Note
f The effect may be difcult to notice depending on the image.
f Switch the setting when the image looks unnatural due to delay of image or generation of noise.
f The [FRAME CREATION] setting will be disabled and cannot be selected when [FRAME RESPONSE] is set to [FAST] or [COMPATIBLE].
f The [FRAME CREATION] setting will be disabled and cannot be selected when the [3D SETTINGS] menu → [3D SYSTEM SETTING]
(x page 103) is set to [DUAL (LEFT)] or [DUAL (RIGHT)].
f The [FRAME CREATION] setting will be disabled and cannot be selected when the [3D SETTINGS] menu → [3D INPUT FORMAT]
(x page 104) is set to [AUTO], [SIMULTANEOUS], [SIDE BY SIDE], [TOP AND BOTTOM], [LINE BY LINE], or [FRAME SEQUENTIAL]. In
[AUTO], the setting will be disabled only when 3D format can be recognized. (Only for PT-DZ21K2, PT-DS20K2)
f The [FRAME CREATION] setting will be disabled and cannot be selected when the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING]
(x page 112) is set to [AUTO(3D)] or [AUTO(2D)] and the image in simultaneous format is displayed.
f This function is disabled when the internal test pattern or [3D TEST PATTERN] is displayed.
[FRAME LOCK]
(Only for PT-DZ21K2, PT-DS20K2)
Set this function to display the image in 3D when the vertical scanning frequency of the signal is 25 Hz, 50 Hz,
and 100 Hz.
1) Press as to select [FRAME LOCK].
England 
Deutschland 
France 
Italia 
Polska 
United Kingdom 
Россия 
Nederland 
España 
Magyarország 
Sverige 
România 
Portugal 
Colombia 
Suomi 
New Zealand 
Česká republika 
Türkiye 
Danmark 
日本